Test The L2Tp Vpn Tunnel - ZyXEL Communications ZyWALL 110 Handbook
Zywall/usg series security firewalls
Hide thumbs
Also See for ZyWALL 110:
- User manual (1090 pages) ,
- Handbook (749 pages) ,
- Handbook & instructions (255 pages)
Table of Contents
Advertisement
5.5.3 Test the L2TP VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the Status
1
connect icon is lit when the interface is connected.
Figure 578 CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and the
2
Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to verify the result of
ICMP Connectivity.
Figure 579 MONITOR > VPN Monitor > IPSec > WIZ_L2TP_VPN
Go to ZyWALL/USG MONITOR > VPN Monitor > L2TP over IPSec and verify the Current L2TP
3
Session.
Figure 580 MONITOR > VPN Monitor > L2TP over IPSec > L2TP_Remote_Users
Go to MAC OS X System Preferences... > Network and show Connected status, Connect Time
4
and assigned IP Address.
Chapter 5 Create Client-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
238
Advertisement
Table of Contents
