Set Up The Wi-Fi Guest Account And Authentication Method On The Zywall/Usg; Set Up The Active Directory Server Account On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook

2.3.1 Set Up the Wi-Fi Guest Account and Authentication Method on the
ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Object > User/Group > User > ad-users, set
1
the Authentication Timeout Settings to Use Manual Settings and enter the number of minutes
this user has to renew the current session before the user is logged out.
Figure 65 CONFIGURATION > Object > User/Group > User > ad-users
In the ZyWALL/USG, go to CONFIGURATION > Object > Authentication Method > default >
2
Edit Authentication Method default, click Add to insert group ad in the table. Click OK.
Figure 66 CONFIGURATION > Object > User/Group > User > ad-users
In the ZyWALL/USG, go to CONFIGURATION > Web Authentication > General Settings and
3
select Enable Web Authentication.
Figure 67 CONFIGURATION > Web Authentication > General Settings

2.3.2 Set Up the Active Directory Server Account on the ZyWALL/USG

In the ZyWALL/USG, go to CONFIGURATION > Object > AAA Server > Active Directory >
1
Add Active Directory to configure the AD sever. Enter the Server Address (192.168.1.33 in this
example) and Based DN (dc=cso,dc=net in this example). Specify the Bind DN for logging into
the AD server (cn=Administrator,cn=users,dc=cso,dc=net in this example). If required, enter the
Password for the ZyWALL/USG to bind (or log in) to the AD server.
Chapter 2 Set Up WiFi
ZyWALL/USG Series User's Guide
43