Test The Result; What Can Go Wrong - ZyXEL Communications ZyWALL 110 Handbook

2.1.2 Test the Result

Go to the ZyWALL/USG Monitor > Wireless > AP Information > AP List, you can check the list
1
of APs which are currently connected to it and the details information such as Registration type,
Model and Recent On-line Time /Last Off-line Time.
Figure 46 MONITOR > Wireless > AP Information > AP List
Go to the ZyWALL/USG Monitor > Wireless > Station Info > Station List, you can check the
2
list of wireless stations associated with a managed AP and the details information such as SSID
Name, Signal Strength and the transmit (Tx)/receive (Rx) data rate.
Figure 47 MONITOR > Wireless > Station Info > Station List
Using a mobile device to connect to SSID: ZyXEL_AP1 and type the password (zyxel123) for
3
authentication. Go to the ZyWALL/USG Monitor > Log, you will see [info] log message as shown
below. The ZyWALL/USG will assign an IP address to the mobile device and the mobile device can
access the Internet.
Figure 48 MONITOR > Log

2.1.3 What Can Go Wrong?

If you can't see AP information in the AP List, please check the number of APs connected to the
1
ZyWALL/USG has exceeded the maximum Managed AP number it can support. You can check the
maximum support number of each ZyWALL/USG in the Datasheet from ZyXEL Download Library -
http://www.zyxel.com/support/download_landing.shtml
If your mobile device can't find the AP SSID you configured, please go to CONFIGURATION >
2
Object > AP Profile > SSID > SSID List and check if the Hidden SSID option is enabled.
If your mobile device can't access to the Internet via AP connects to the ZyWALL/USG, please check
3
if the LAN outgoing security policy allow access to the Internet.
If your mobile device is not connected to the AP automatically even you've joined the Wifi network
4
before and you see [Wlan Station Info] log message as shown below, please check if this AP is
removed from your mobile device's saved Wifi network list.
Figure 49 MONITOR > Log
Chapter 2 Set Up WiFi
ZyWALL/USG Series User's Guide
36