Figure 230 CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type
4.1.3 Test the IPSec VPN Tunnel
Go to ZYWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click Connect
1
on the upper bar. The Status connect icon is lit when the interface is connected.
Figure 231 CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time and
2
Inbound(Bytes)/Outbound(Bytes) Traffic.
Figure 232 MONITOR > VPN Monitor > IPSec
To test whether or not a tunnel is working, ping from a computer at one site to a computer at the
3
other. Ensure that both computers have Internet access (via the IPSec devices).
Figure 233 PC at HQ Office > Window 7 > cmd > ping 192.168.10.33
Figure 234 PC at Branch Office > Window 7 > cmd > ping 192.168.1.33
Chapter 4 Create Site-to-Site VPN Tunnels
ZyWALL/USG Series User's Guide
109