Set Up The Vpn Connection; Figure 61 Vpn > Ipsec Vpn > Vpn Gateway > Add; Figure 62 Object > Address > Address > Add - ZyXEL Communications ZyWALL 1050 User Manual

Internet security appliance

Hide thumbs Also See for ZyWALL 1050:

Table of Contents

Figure 61 VPN > IPSec VPN > VPN Gateway > Add

6.2.3 Set up the VPN Connection

The VPN connection manages the IPSec SA. You have to set up the address objects for the

local network and remote network before you can set up the VPN connection.

1 Click Object > Address > Address. Click the Add icon.

2 Give the new address object a name ("VPN_LOCAL_RANGE"), change the Address

Type to RANGE, and set up the rest of the fields to 192.168.1.33 and 192.168.1.232.

Figure 62 Object > Address > Address > Add

3 Repeat the process to create a new address object for the remote network

("VPN_REMOTE_SUBNET", 192.168.10.0/24).

4 Click VPN > IPSec VPN > VPN Connection. Click the Add icon.

5 Give the VPN connection a name ("VPN_CONN_EXAMPLE"), and select the VPN

proposal settings in this example--ESP, Tunnel encapsulation, DES encryption, and

SHA1 authentication--so do not change these settings. In the Policy section, select the

address objects for the local and remote networks. Click OK.

ZyWALL 1050 User's Guide

(Section 6.2.2 on page

130) in the VPN Gateway section. Use the default

Chapter 6 Tutorials