Printer Setup; Printer Connections; Power Connection - Datamax I-Class Mark II Operator's Manual

2
2
2
P
P
P
2 . 1 P r i n t e r C o
2 . 1 P r i n t e r C
2 . 1 P r i n t e r C

2.1.1 Power Connection


Before connecting the AC Power Cord or interface cables to the printer, ensure the Power On/Off
Switch is in the 'Off' position.
Place the printer on a firm, level surface.
Ensure that the Power Switch on the Printer is in the 'Off' position.
Connect the AC Power Cord to the receptacle on the back of the Printer, and then plug the AC
Power Cord into a properly grounded outlet. (The power supply automatically detects and
then adjusts to the applied line voltage; see Appendix A for the acceptable voltage
ranges.)
Chapter 2 - Printer Setup
r i n t e r
r i n t e r
r i n t e r
n n e c t i o n s
o n n e c t i o n s
o n n e c t i o n s
S e t u p
S e t u p
S e t u p

Power Switch

AC Power Cord

Wall Outlet
3