Checking And Adjusting Gap Of Speed/Rear Abs Sensor - BMW F 650 GS Repair Manual

Checking and adjusting gap
34 52 544
of speed/rear ABS sensor
e
Important:
Check the speed/ABS sensor gap if the ABS sen-
sor, sensor ring, brake-caliper holder, spacer
sleeve, rear wheel, or wheel bearing has been re-
placed.
– Take the weight off the rear wheel.
•
Remove wheel cover together with chain cover.
6
4
5
•
Check gap between ABS sensor (4) and sensor
ring (5) by inserting feeler gauge at three points
offset 120° around the ring.
Adjusting ABS sensor gap
– Gap is larger than 1 mm (0.04 in) at at least one
point.
•
Remove ABS sensor (4).
•
Remove washer (6).
– Gap is less than 0.1 mm (0.004 in) at at least one
point.
•
Remove ABS sensor (4).
•
Install washer (6).
e
Important:
After adjusting, check clearance of ABS sensor
round the entire circumference of sensor ring.
ABS sensor gap ..... 0.10...1.0 mm (0.004...0.04 in)
X
Tightening torque:
ABS sensor, rear ............................................ 9 Nm
E340310
34.21