Disassembling telescopic fork
31 42 503
Removing fixed tube
•
Remove clamp (6).
•
Remove fork stabiliser (5).
•
Slacken clamping screws (4) at lower fork
bridge.
•
Remove fixed tube together with slider tube from
fork bridge.
•
Clamp slider tube in vice with protective jaws.
•
Position a drip tray beneath the fixed tube.
•
Remove oil drain plug (7).
•
Allow all the oil to drain off.
31.10
8
•
[GS] Remove sealing caps (1).
d
Warning:
Note that plugs (3) at left and right are spring-load-
ed. Wear protective goggles when removing and in-
stalling.
•
[GS] Press plug (3) down and remove snap
ring (2). Carefully allow the plug to ride up and re-
move.
d
Warning:
Note that screw plugs (1) at left and right are spring-
loaded.
•
[Dakar] Remove screw plugs (8).
1
2
3
4
5
6
7
E310081