Removing and installing fuel
16 11 030
tank
e
Important:
Note risks when handling fuel.
Disconnect ground lead from battery and insulate.
Removing fuel tank
16 11 030
–
Remove the seat and the toolkit.
–
Secure front wheel in position.
–
Remove chain take up roller (
–
Remove right and left rear trim panels (
–
Remove right and left silencers (
•
Remove brake fluid reservoir from rear frame.
•
Close off the brake line to the brake master cyl-
inder beneath the fuel tank.
•
Close off fuel supply line (1) and the fuel return
line (2) with hose clips, BMW No. 13 3 010.
•
Open the hose clips (arrows) and disconnect the
fuel lines from the fuel-pump unit.
•
Disconnect breather hose (3) from the roll-over
valve.
27.5).
a
46.9).
a
18.5).
a
L
Do not unplug the BMS control unit.
•
Disengage the rubber strap (arrow) and remove
the BMS control unit.
•
Disconnect the plugs for fuel-level sensor (3) and
fuel pump (4).
•
Disconnect the plug for rear light/turn
indicator (5).
•
Remove holder (6) for BMS control unit from the
3
fuel tank.
2
1
E160020
5
•
Press the tab (arrow) down and remove the plug
for rear light/turn indicator (5) from holder (6) for
the BMS control unit.
3
4
Note:
6
5
E160030
6
E160040
16.5