Maintenance Schedule - BMW F 650 GS Repair Manual

BMW Motorcycle

Maintenance schedule

F 650 GS/F 650 GS Dakar
Customer
Order No.
Read the fault code memory with the BMW MoDiTeC
Change the engine oil while at regular operating temperature; replace the oil filter
element
if motorcycle is used only for short journeys or at outside temperatures below 0°C (32°F): every
3 months or at the latest after 3,000 km (1,800 miles)
Renew oil in telescopic forks [Dakar version only]
Check the coolant and restore to correct level if necessary *
Replace the coolant
(every 2 years)
Check valve clearances, adjust if necessary
Replace the spark plug
Drain the outlet hose from the air filter box
Replace intake air filter
If motorcycle is operated in very dirty or dusty conditions, clean or replace the intake air filter every
10,000 km (6,000 miles); check every 3,000 km (1,800 miles)
Replace fuel filter (every 20,000 km/12,000 miles)
Check clutch play, adjust if necessary
Check wheel spoke tension and tighten if necessary
more frequently if motorcycle is ridden in severe off-road conditions
Examine brake pads and discs for wear, replace if necessary *
more frequently if motorcycle is ridden in severe off-road conditions
Check brake fluid level at front and rear and top up if necessary *
Check for operation of brake system and freedom from leaks; repair/replace if necessary *
Replace the brake fluid at least once a year
Replace the primary front/rear brake master cylinder cup
(every 40,000 km/24,000 miles on a motorcycle with ABS)
Check or, if necessary, replace chain, sprocket, chain guide rollers and pinion *
more frequently if motorcycle is ridden in severe off-road conditions
Check chain tension and adjust if necessary *
Check battery acid level, add distilled water if necessary
more frequently if motorcycle is ridden in severe off-road conditions
Clean and grease the battery terminals, if necessary
Check steering head bearings and adjust *
Grease the side and main stands
Grease the brake pedal
Check bolts and nuts on engine mountings, frame connections, exhaust system
mountings, pivot lever [Dakar version only], main and side stands for tightness
Final inspection with road safety and functional check:
– (Clutch, gearshift)
– Steering
– Front and rear brakes
Side stand contact switch
– Condition of tyres and wheels, tyre pressures
– Lights and signalling equipment, indicator and warning lights, instruments
– Test ride, if necessary
* )
Associated work invoiced separately, see Flat rates brochure, Motorcycle 2000
Order No. 01 71 0 021 836
Licence plate no.
Mechanic's signature
)
)
)
)
) or replace if necessary *
UX-VS-2, 02/00
)
)
)
every
2 years
20,000
km
40,000
km
Printed in Germany