Reactivating and positioning
When the "Reactivate with positioning" function is configured, the selected tool's magazine
location will also be positioned at a loading point. You can exchange the tool.
Reactivation of all monitoring types
When the "Reactivation of all monitoring types" function is configured, all the monitoring types
set in the NC for a tool are reset during reactivation.
References
SINUMERIK Operate Commissioning Manual
Multiple load points
If you have configured several loading points for a magazine, then the "Loading Point
Selection" window appears after pressing the "Load" softkey.
Select the required load point and confirm with the "OK" softkey.
11.7
Tool data OEM
You have the option of configuring the list according to your requirements.
References
Refer to the following document for more information on configuring OEM tool data:
SINUMERIK Operate Commissioning Manual
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "OEM tool" softkey.
3.
Position the cursor on a grinding tool.
Tool management
11.7 Tool data OEM
237