Opening A Program Block In The Window - Siemens SINUMERIK 840D sl Operating Manual

Edit PLC user program (828D only)
20.5 View of the program blocks
Creating a new block
You can create new program blocks with the ladder editor.
Name
Author
Number of subpro‐
gram
Data class
Comment
Note
Access protection
You have the option of protecting blocks that have been newly created against being accessed.
Requirement
Procedure
20.5.7.4

Opening a program block in the window

You can display all the logic and graphic information for a program block.
376
INT _100, INT_101
The number from the selection field "Number of subprogram" is taken for
the name of the INT block.
A maximum of 48 characters is permitted.
100, 101
Individual
A maximum of 100 lines and 4096 characters are permitted.
Software option
To edit the entire PLC user program, you require the "SINUMERIK 828 Ladder
Editor" option.
If this option is not available, you can only edit INT100 and INT101.
1. The "Program Block" window is open.
2. Press the "New" softkey.
The "Properties" window opens.
3. Select den desired INT block and enter the name of the author, the num‐
ber of the subprogram and, if required, a comment.
Press the "Accept" softkey.
Operating Manual, 05/2017, A5E40868517
Universal