Siemens SINUMERIK 840D sl Operating Manual page 286

Managing programs
12.12 Set up drives
Entry
Partition
USB path
Specifications for local drives
Entry
Symbolic
Additional parameters under Details
Use drive as:
Specifications for network drives
Entry
Computer name
Release name
Path
User name
Password
Symbolic
286
LOCAL_DRIVE
CF_CARD
SYS_DRIVE
Only for network drives in
Windows systems.
Description
Partition number on the USB storage medium,
e.g. 1 or all.
If a USB hub is being used, then specify the
USB port of the hub.
Path to the USB hub.
Note:
This value is not currently evaluated.
Description
Symbolic drive name.
Assignment of the names under Details
The activation of the checkbox assigns the
symbolic name to the drive.
If an assignment exists already for the drive,
no change can be made.
All checkboxes are active as preassignment.
Description
Logical name of the server or the IP address.
Name, under which the network drive was re‐
leased
Start directory.
The path is specified relative to the released
directory.
Enter the user name and the corresponding
password for which the directory is enabled on
the server.
The password is displayed in encoded form
as string of "*" characters and is stored in the
"logdrive.ini" file.
Symbolic drive name.
Maximum 12 characters can be entered (let‐
ters, digits, underscore).
The names NC, GDIR and FTP are reserved.
They are also used to label the softkey if a
softkey text is not specified.
Operating Manual, 05/2017, A5E40868517
Universal