Siemens SINUMERIK 840D sl Operating Manual page 333

Figure 15-2
Standard windows
The following windows are offered as standard:
Universal
Operating Manual, 05/2017, A5E40868517
Sidescreen with minimized standard windows
Alarms
This window shows all the alarms in the alarm list. The alarm
number and description are displayed for every alarm.
An acknowledgment symbol indicates how the alarm can be
acknowledged or canceled.
Axle load
This window shows the load on all axles in a bar chart.
Tool
This window displays the geometry and wear data for the active
tool.
The following information is additionally displayed depending
on the machine configuration:
● EC: active location-dependent offset - setting up offset
● SC: active location-dependent offset - additive offset
● TOFF: programmed tool length offset in coordinates of the
WCS and programmed tool radius offset
● Override: Value of the overridden movements that were
made in the individual tool directions
Widescreen format multi-touch panels (840D sl only)
15.1 Sidescreen with standard windows
333