Modifying The Viewport - Siemens SINUMERIK 840D sl Operating Manual

Procedure
Note
Working with a mouse
Using the mouse, you have the option of rotating and shifting the mold making view.
● To do this, move the graphic with the left-hand mouse key pressed in order to reposition
the mold making view.
● To do this, move the graphic with the right-hand mouse key pressed in order to rotate the
mold making view.
6.18.5.3

Modifying the viewport

If you want to look at the details, you can shift and change the size of the mold building view
section using a magnifying glass.
Using the magnifying glass, you can define your own segment and then increase or decrease
its size.
Precondition
● The mold making view has been started.
● The "Graphic" softkey is active.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
1. Press one of the cursor keys to move the mold making view up, down,
left or right.
- OR -
With the <SHIFT> key pressed, rotate the mold building view in the re‐
quired direction using the cursor keys.
1. Press the "Details" softkey.
2. Press the "Zoom" softkey.
A magnifying glass in the shape of a rectangular frame appears.
3. Press the "Magnify +" or <+> softkey to enlarge the frame.
Machining the workpiece
6.18 Mold making view
167