Selecting A Magazine - Siemens SINUMERIK 840D sl Operating Manual

11.5.6

Selecting a magazine

You can directly select the buffer memory, the magazine, or the NC memory.
Procedure
Hiding magazines
The magazine selection behavior with multiple magazines can be configured in different ways.
Universal
Operating Manual, 05/2017, A5E40868517
3. Confirm your selection with "OK".
- OR -
Undo your selection with "Cancel".
1. The tool list is opened.
2. Press the "Magazine selection" softkey.
If there is only one magazine, you will move from one area to the next
(i.e. from the buffer memory to the magazine, from the magazine to the
NC memory, and from the NC memory back to the buffer memory) each
time you press the softkey. The cursor is positioned at the beginning of
the magazine each time.
- OR -
If there is more than one magazine, the "Magazine Selection" window
opens. Position the cursor on the desired magazine in this window and
press the "Go to" softkey.
The cursor jumps directly to the beginning of the specified magazine.
Deactivate the checkbox next to the magazines that you do not want to appear in the
magazine list.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Tool management
11.5 Tool list
229