Displaying Superimpositions - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.14 Displaying status of synchronized actions
6.13

Displaying superimpositions

You can display handwheel axis offsets or programmed superimposed movements in the
"Superimpositions" window.
Input field
Tool
Min
Max
DRF
The selection of values displayed in the "Superimposition" window may differ.
Procedure
...
6.14 Displaying status of synchronized actions
You can display status information for diagnosing synchronized actions in the "Synchronized
Actions" window.
You get a list with all currently active synchronized actions.
144
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. Select the "Machine" operating area.
2. Press the <AUTO>, <MDI> or <JOG> key.
3. Press the ">>" and "Superimposition" softkeys.
The "Superimposition" window opens.
4. Enter the required new minimum and maximum values for superimposi‐
tion and press the <INPUT> key to confirm your entries.
Note:
You can only change the superimposition values in "JOG" mode.
5. Press the "Superimposition" softkey again to hide the window.
Meaning
Current superimposition in the tool direction
Minimum value for superimposition in the tool direction
Maximum value for superimposition in the tool direction
Displays the handwheel axis offset
Operating Manual, 05/2017, A5E40868517
Universal