Changing The Main Fuse - Husqvarna FE 450 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.4
110

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
Guideline
The battery charger must be suitable for lithium-ion
batteries.
The charging current and charging voltage must not
be exceeded.
Maximum charging volt-
age
Maximum charging cur-
rent
Charge the battery regu-
larly when the motorcy-
cle is not in use
Ideal charging and stor-
age temperature of the
lithium-ion battery
Info
If the charging current or charging voltage are
exceeded, the battery will be destroyed.
If the battery is left in a discharged state
for an extended period, it will become
over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free.
Never remove cover
–
Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
–
Install the battery. (
–
Mount the seat. ( p. 68)
–
Install the air filter box cover. (
Preparatory work
–
Turn the key in the ignition lock to the position
engine is idling.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 68)
14.4 V
3.0 A
6 months
10 ... 20 °C (50 ... 68 °F)
1 .
p. 108)
p. 69)
while the
p. 69)