Installing Front Fender - Husqvarna FE 450 2018 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.15
12.16
64

Installing front fender

F00283-10
Removing the shock absorber
E00939-10
F00284-10
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove the cable ties.
–
1
Remove screws .
–
2
Remove screws with the washers.
–
Remove the frame protectors on the left and right.
–
3
Remove screw .
–
4
Remove fitting .
Info
Raise the wheel slightly to be able to remove the
screws more easily.
1
.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 113)
p. 116)
p. 55)