Husqvarna FE 450 2018 Owner's Manual page 32

7 COMBINATION INSTRUMENT
7.9
7.10
30
Speed, time, and DST2 distance 2
401902-01
AVG average speed, ART operating hours, and ODO total distance covered
401903-01
Press the DST is reset to 0.0.
right button
for 3 – 5 sec-
onds.
–
Press one of the buttons until DST2 appears on the combina-
tion instrument.
KM/H or M/H shows the speed.
shows the time.
DST2 shows the distance 2 since the last reset, such as between
two refueling stops.
Info
If the value of 39999.9 is exceeded, DST2 is automatically
reset to 0.0.
Press the left Next display mode
button briefly.
Press the left DST2 can be preset to a value between 0.0
button for 3 –
and 39999.9 by pressing the buttons.
5 seconds.
Press the Next display mode
right button
briefly.
DST2 is reset to 0.0.
Press the
right button
for 3 – 5 sec-
onds.
–
Press one of the buttons until AVG, ART and ODO appear on
the combination instrument.
AVG shows the average speed since the last reset.
ART shows the operating hours.
ODO shows the total distance covered.
Press the left Next display mode
button briefly.
Press the left The OPEN END WRENCH SYMBOL shows
button for 3 –
the remaining operating hours until the next
5 seconds. service is due.
Press the Next display mode
right button
briefly.
AVG is reset to 0.0.
Press the
right button
for 3 – 5 sec-
onds.