Substances - Husqvarna FE 450 2018 Owner's Manual

Brake fluid DOT 4
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that
possesses the corresponding properties.
Recommended supplier
Bel‑Ray ®
–
Super DOT 4 Brake Fluid
Coolant
Guideline
–
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
–
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion pro-
tection and lubrication properties.
–
Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant
needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility)
with other coolants.
Recommended supplier
®
Bel‑Ray
–
Moto Chill Racing Coolant
Engine oil (SAE 10W/50)
Standard/classification
–
JASO T903 MA ( p. 154)
–
SAE ( p. 154) (SAE 10W/50)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that
possess the corresponding properties.
Synthetic engine oil
Recommended supplier
®
Bel‑Ray
–
Works Thumper Racing Synthetic Ester 4T
Fork oil (SAE 4) (48601166S1)
Standard/classification
–
SAE ( p. 154) (SAE 4)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
−25 °C (−13 °F)

24 SUBSTANCES

151