Lubricating The Steering Head Bearing - Husqvarna FE 450 2018 Owner's Manual

12.13

Lubricating the steering head bearing

12.14 Removing front fender
12 SERVICE WORK ON THE CHASSIS
Finishing work
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
H02387-01
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Remove screws
F00282-10
( p. 58)
( p. 59)
1
.
2 . Take off the front fender.
p. 61)
p. 55)
p. 113)
63