Changing The Combination Instrument - Husqvarna FE 450 2018 Owner's Manual

15.12

Changing the combination instrument

15.13 Diagnostics connector
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the combination instrument upward out of the holder.
F00370-10
–
Using a coin, turn protection cap
clockwise and remove it.
–
Remove combination instrument
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
F00371-10
–
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
F00372-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Adjust the combination instrument. (
Diagnostics connector
H00933-12
15 ELECTRICAL SYSTEM
1
with the washers.
2
all the way counter-
3
.
2
and turn all the way clockwise
p. 116)
p. 26)
1
is located under the seat.
p. 113)
p. 147)
p. 113)
117