12 SERVICE WORK ON THE CHASSIS
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
S02084-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F00464-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
–
Position the frame protectors on the left and right.
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount and tighten screws
Guideline
Screw, frame pro-
E00939-11
tector
–
Mount the new cable ties.
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
5
engages in the foot brake cylinder.
6
.
M6
10 Nm (7.4 lbf ft)
7
.
M14x1.5
80 Nm (59 lbf ft)
B
.
8
.
M10
60 Nm (44.3 lbf ft)
9
.
M5
3 Nm (2.2 lbf ft)
bk
with the washers.
M5
3 Nm (2.2 lbf ft)
®
Loctite
2701™
p. 94)
p. 55)
67