Husqvarna FE 450 2018 Owner's Manual page 22

6 CONTROLS
6.5
6.6
6.7
6.8
20
Light switch
K00599-10
Turn signal switch
K00599-11
Emergency OFF switch
S02068-10
Electric starter button
S02069-10
1
The light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – The light switch is turned down-
ward. In this position, the low beam and tail light are
switched on.
High beam on – The light switch is turned upward.
In this position, the high beam and the tail light are
switched on.
1
Turn signal switch is fitted on the left side of the handlebar.
Possible states
Turn signal light off
Turn signal light, left, on – The turn signal switch is
pressed to the left. The turn signal switch returns to
the middle position after activation.
Turn signal light, right, on – The turn signal switch is
pressed to the right. The turn signal switch returns to
the middle position after activation.
To switch off the turn signal, press the turn signal switch toward
the switch housing.
1
The emergency OFF switch
handlebar.
Possible states
Ignition off – In this position, the ignition circuit
is interrupted, a running engine stops, and a
non-running engine will not start.
Ignition on – In this position, the ignition circuit is
closed and the engine can be started.
1
The electric starter button
handlebar.
Possible states
• Electric starter button
• Electric starter button
electric starter is actuated.
is fitted on the right side of the
is fitted on the right side of the
in basic position
is pressed – In this position, the