Service Schedule - Husqvarna FE 450 2018 Owner's Manual

Table of Contents

Advertisement

10 SERVICE SCHEDULE

10.1
Any further work that results from the required work or from the recommended work must be ordered sepa-
rately and can be invoiced separately.
10.2
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the battery.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame.
Check the swingarm.
Check the swingarm bearing for play.
Check the heim joint for play.
Check the shock absorber linkage.
Check the tire condition. (
Check the tire air pressure. (
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. (
Check the chain, rear sprocket, engine sprocket and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth oper-
ation.
Check/correct the fluid level of the hydraulic clutch. (
Check the front brake fluid level. (
Check the free travel of the hand brake lever.
Check the play of the steering head bearing. (
Check the valve clearance.
Check the clutch.
Change the engine oil and oil filter and clean the oil screens.
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks,
and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
42
Additional information
Required work
p. 91)
p. 97)
p. 89)
p. 95)
(
p. 84)
(
p. 84)
p. 105)
p. 105)
p. 106)
p. 80)
p. 90)
Every 30 operating hours/after every race
Once after 1 operating hour
p. 94)
p. 81)
p. 86)
p. 61)
(
p. 129)
p. 118)
Every 45 operating hours
Every 15 operating hours

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 501 2018

Table of Contents