Table of Contents
Advertisement
SCM-TLC
The area 3 will be used in order to define the position of a given station in the list
(A) and therefore the order for the automatic calls.
4) Frequency of station calls according to the scheme:
0 - 3 times a day (morning, afternoon and evening)
1 - once a day, morning
2 - once a day, afternoon.
3 - once a day, evening.
4 - 3 times a week
5 - once a week.
6 - once a month.
7 - Never.
5) Date of the beginning of the scheduling
B.
Configuration tables of the stations. Basically for each station present in the
Table Phone_Book, there will be 2 corresponding tables having a name with
progressive intitials that will refer to the station situated in the area formerly described.
The name of the two stations will start with a different suffix in order to identify them:
"_sto" for the table where the data data received by the remote station are stored,
"_cfg" for the table where the scheduling configuration data are registered.
The following areas are present in these tables:
Table "_cfg"
1) Position X on the map. (Single)
2) Position Y on the map. (Single)
3) Data Start Scheduling
4) Start Time of Scheduling
5) Number of Retry from 1 to 99, with 0 indicating "unlimited"
6) Date of the last connection
7) Time of the last connection
8) Status of the station during the last connection:
0 - OK
1 - COM
2 - RETRY
3 - FAULT
Table "_sto"
1) String received with data.
40 / 50
- Station funcioning correctly.
- Comunication problem (when maximum number of retry is reached)
- Station making a Retry.
- Station in Alarm.
Rev. 1.0 - 17/01/03
User Manual
Advertisement
Table of Contents
