Table of Contents
Advertisement
2. Monitoring Telemetry Stations
2.1 Functioning
This is a telemetry software that gives the possibility to call automatically and cyclically
every station from a list of stations, having their status displayed in a very simple and
clear way and indicating which station is in alarm and the type of alarm.
Morevover, it is possible to have the software calling a station after having been
informed by an SMS, and have its status displayed immediately.
2.2 Installation
•
Insert the CD-ROM in the CD-ROM player.
From the desktop, open "Program Manager ".
•
•
Double click on the CD-ROM player to visualize its content.
Double click on the program Tlc32bit.exe in order to set up the installation.
•
It may be required to install the drivers which are necessary for the access to
data, before installing the software.
When the installation is completed, the "Tlc32bit" group which contains the
•
programs: "Telecon 32bit" and "GSM Init" will be created, after which the connection
icons will appear on the Desktop.
Required systems:
•
Operational system:
Windows 95 ®, Windows 98 ® either first or second edition, Windows ME ®.
The software does not work under Windows NT ® and Windows 2000 ®.
Processor:
•
Intel Pentium ® 75 MHz or better.
Minimum Memory required:
•
32MB Ram.
Minimum capacity on Hard Disk required:
•
Minimo 50Mb.
2.3 Telemetry software
As you can see on the image, the telemetry software is composed of three main
windows:
User Manual
Rev. 1.0 - 17/01/03
SCM-TLC
33 / 50
Advertisement
Table of Contents
