Table of Contents
Advertisement
•
Rel. :
•
IIC :
• - (minus): indicates that the device does not respond to the requests and as
such there is no communication.
• IIC : indicates that the device is present and communicates correctly.
• If there is no symbol this means that there are no devices that can communicate
with this mode or that the dip-switches, relative to the number of devices present,
have not been set correctly.
•
Retry. : identifica il numero dei tentativi di chiamata di ogni singolo numero di
•
Dial : specifica la stringa in caso di chiamata a modem PSTN;
•
Info :
•
Modem :
10.4 J.set - Optional settings
Through this menu is possible to visualize a series of other configuration parameters.
Are present as visualizations:
•
The value of attenuation (expressed in dB) applied on thresholds of participation
of the 2 alarms standards (Forward Power and Reflected Power).
•
The activation of the local signalling function of happened alarm concurring, through
the closing of the relay 8 contact of the additional card normally opened, to insert
one acoustic alarm,for example.
•
Modality of operation of the apparatus :
1)
2)
3)
•
The alarms that are not qualified at the moment:
1)
2)
3)
4)
User Manual
identifies the software release number and the issue date;
a symbol is displayed next to the number that represents address I
telefono, in caso di allarme;
if a modem is present, the initialization and operating stages are specified;
indicates that the modem is or is not present.
Solid State Amp
Tube Amplifier
General purpose
Alarm Standard
Alarm General
All Alarms
The dip-switches that have been setting in position ON.
Rev. 1.0 - 05/05/03
TLC2000
2
C:
41 / 50
Advertisement
Table of Contents
