R.V.R. Elettronica SpA TLC2000 User Manual page 17

5.2.2 Alarm condition
In case of an alarm, the TLC limits to the remote and local signalling of the damage
found.
5.2.2.1 Alarm type 0
This type of alarm happens on the climb forehead of the voltage present at the input
correspondent on the telemetry card, comes therefore generated an alarm message
that comes memorized locally and comes subsequently sended, through a modem,
to the numbers and in the modalities indicated from the carried out programming.
5.2.2.2 Alarm type 1
Analogous this type of alarm happens on the reduction forehead of the voltage present
at the input correspondent on the telemetry card, comes therefore generated an alarm
message that comes memorized locally and comes subsequently sended, through a
modem, to the numbers and in the modalities indicated from the carried out
programming.
5.2.2.3 Audio signal missing (PTX-LCD only)
The audio signal presence control is carried out only if the exciter of the transmitters
is a PTX-LCD series exciter comes, therefore, generated an alarm message that
comes memorizzato locally and comes subsequently sended through modem to the
numbers and in the modalities indicated from the carried out programming.
2
5.2.2.4 I C bus alarms
The control on the presence of alarms comes made only in the case is present LCD
equipments comes therefore generated a message alarm that comes memorized
locally and comes subsequently sended through a modem to the numbers and in the
modalities indicated from the carried out programming.
5.2.2.5 Default codes
The codes of alarm of default are reassumed in the table.
User Manual
CODE Indicazione
000 Forward Power
001 Reflected Power
≥ 002 ≤ 011
012 RISERVATO
013 No Audio
014 Mod Fault
015 Restart
Rev. 1.0 - 05/05/03
Significato
Potenza diretta (lettura analogica)
Potenza riflessa (lettura analogica)
Allarmi generali programmabili dall'utente
RISERVATO
Assenza del segnale audio
Avaria Moduli I2C
Riavvio del sistema
TLC2000
13 / 50