Table of Contents
Advertisement
TLC2000
5.2.3 Alarms signalling
The TLC marks the malfunctioning situations in locally and in remote, sending a series
of messages with modalities that depend on the modalities indicated in the carried
out programming.
5.2.3.1
Local signalling
•
If set up, it excites the relay 8 of the Additional card.
5.2.3.2
Remote signalling with telephone modem
•
The TLC calls in sequence all the telephone numbers sets up to you and
communicates the code and alarm description (from the other part must be
connected a PC with the TELECON software in stand-by or a communication
program that attended messages from the modem).
•
The TLC repeats the series of calls for others many times and for all the numbers
indicates to you in the carried out programming.
5.2.3.3
Remote signalling with modem GSM
•
The TLC calls in sequence all the telephone numbers memorized in the memory
and communicates the code and alarm description (from the other part must be
connected a PC with the TELECON software of telecontrollo in stand-by or a
program of attended communication in of messages from the modem).
•
The TLC sendes the same message in SMS format to the numbers memorized
to you through the Serivce Center of GSM manager and repeats the series of
calls for others many times and for all the numbers indicates from you in the carried
out programming.
14 / 50
Rev. 1.0 - 05/05/03
User Manual
Advertisement
Table of Contents
