Table of Contents
Advertisement
"Station Configuration" containing the composition of the station.
•
When you click on the "Edit connections" button (6) the window shown in fig 3 is
•
displayed, from there you can edit the different connection parameters of each
station.
The first time you use the software, it is necessary to enter:
The telephone number,
•
The COM port used,
•
the Baud rate,
•
the type of connection (direct through cable, through telephonic modem or GSM).
•
In order to avoid functioning problems, we will not give instructions concerning stations
User Manual
Rev. 1.0 - 17/01/03
SCM-TLC
Forward /Back
button to select
the stations
To close the
window and
save
parameters
3 / 50
Advertisement
Table of Contents
