Table of Contents
Advertisement
SCM-TLC
The available colours are five:
0 - Black.
1 - Red.
2 - Yellow.
3 - Green.
4 - Blue.
6) Press the "Ok" button.
7) If necessary, position the led in the place required.
8) Repeat the same procedure in order to insert a label with the name of the alarm.
We will now create two buttons to switch on and off the transmitter.
1) In the "Add Control" menu select "Add Pushbutton "On Type".
2) Scegliere il modulo PJ500 dalla casella "A"
3) Among "B" buttons select "OutDig".
4) In box "C" select the measurement "000 (>) TX1 On".
5) In the "Text:" box, enter the name that will be displayed on the button.
6) Press the "Ok" button.
7) If necessary, re-position or change the dimensions of the button.
8) In the "Add Control" menu select "Add Push button "Off Type"
9) Among "B" buttons select "OutDig".
10) In the box "C" select the measurement "001 (>) TX1 Off
11) In the "Text:" box, enter the name that will be displayed on the button.
12) Press the "Ok" button.
13) If necessary re-position or change the dimension of the button.
The personalization should be as follows:
30 / 50
Rev. 1.0 - 17/01/03
User Manual
Advertisement
Table of Contents
