Table of Contents
Advertisement
When the program is started the database used situated in the folder \PHBOOK\ is
shown, ex. "Group_A.mdb". Each group represents a series of stations.
The database situated in the folder \PHBOOK\ contain the general information
concerning the stations: telephone number, connection Baud Rate, COM port used,
etc.
Each station included in a "Group_A.mdb" has a connection to a database situated
in the folder \STATIONS\Group_A\, which contains the names of the database of the
modules that compose it. Such databases are situated in the folder
\MODULE\Group_A\ and are copied and renamed when the creation of the station
from the folder \DEFAULT\ happens.
Example: Let's imagine a group called "Radio1", which contains one station only
called "TX500".
The record of the database "Radio1.mdb" will be composed in the following way:
ID
Name
Descriptions
1 TX500
-- None --
The area "DBName" contains the name of the database (TX500.mdb) situated in
the folder \STATIONS\Radio1\ which contains the information concerning the
composition of the station.
The database of the station, is composed by five tables:
Alarm
•
Contains the data concerning the received alarms.
Alarm_Storic
•
Not exploited.
Configuration
•
Contains the data concerning the composition of the station.
Measure_Storic
•
Not exploited.
•
Personal_Window
Contains data concerning the personalization window.
Therefore
\STATIONS\Radio1\TX500.mdb you will find information concerning the composition
of the station.
Structure of the "Configuration" table.
User Manual
Phone
ModemString
DialString
01239
ATX3
ATDT
in
the
"Configuration"
Rev. 1.0 - 17/01/03
DBName
Com
Baud
Type
TX500.MDB
1
4
table
of
SCM-TLC
InitString
Protocol
0 9600,n,8,1
PROTOCOL_RVR
the
database
15 / 50
Advertisement
Table of Contents
