Table of Contents
Advertisement
10.6 INP01, ..., N - Values of the boards inputs
In the sliding menù are present many voices of this type as many are the cards of
commando relais or telemetry cards contained in the system supervised from the
TLC2000.
Through this menù is possible to visualize all the values of the analogic or digital
input present on the selected card (comprised between 0 and 5V approximately).
The first two lines (eight values) are referred to the balanced analogic inputs; the
other four (sixteen values) to the digital/analogic inputs.
The first "INP01", is referred always to the base telemetry card; the last reports the
values of the digital inputs of relays commando boards.
For knowing to which equipments are referred the values of the other cards (if installed),
make reference to the technical dossier of station.
10.7 OUT01, ..., N - Output Relais status
In the sliding menù are present many voices of this type as many are the cards of
commando relais or telemetry cards contained in the system supervised from the
TLC2000.
Through this menu is possible to visualize the state ON/OFF state of several relais
presents on the selected card.
The first, "OUT01", is referred always to the base telemetry card; the last reports the
values of coaxial relays state.
For knowing to which equipments are referred the values of the other cards (if installed),
make reference to the technical dossier of station.
User Manual
Rev. 1.0 - 05/05/03
TLC2000
43 / 50
Advertisement
Table of Contents
