Setting Of The Dip-Switches - R.V.R. Elettronica SpA TLC2000 User Manual

TLC2000

9.2 Setting of the Dip-Switches

The figure shows a part of the panel card that highlights the 24 Dip-Switches, divided
into 3 parts of 8 switches each, numbered from one to three. Use the following
numbering to determine the position of the individual switch:
• Sw1.1: this is the first switch of the first part.
............
• Sw8.3: this is the last switch of the last part.
9.2.1 Setting of the Dip-Switches
9.2.1.1 Modem type
With these two Dip-Switch can be chosen the type of modem connected to the system
acting as the indications of the table.
34 / 50
D28 D33 D30 D35 D36 D3
D29 D34 D32 D31 D2
1
2
JP3
1
2
JP2
3
Rev. 1.0 - 05/05/03
D1
JP4
16
2
CN2
CN1
1
1
User Manual