SCM-TLC
3.2 In Analogic with RVR's LCD Equipment
To connect different RVR' base equipment between they, that aren't digital, is
necessarily use an IB (see accessories), that allows the redistribution of the signals
them coming from the equipment in order to make them to reach in right way on the
inputs of the TLC.
All the connections between the devices come made through standard parallels
cables, connecting between the IB and the equipment the outputs that have the same
label:
Service
•
Telemetry
•
3.3 In Analogic with Generic Equipment
In this case it must resort to the connection tables, remembering that the balanced
inputs are operative with not greater tensions of 12V while those digitals arrive to the
maximum to 5V.
The tensions must be in continuum current.
44 / 50
-> Service
-> Telemetry
Rev. 1.0 - 17/01/03
User Manual