SCM-TLC
How to insert a led to indicate the presence of an SWR alarm.
1) From the menu "Add Control" select "Add Led".
2) 2. Select the module PJ500 in box "A".
3) 3. Among the "B" buttons, click on "InAna".
4) In box "C" choose the measurement "011 (D) TX1 SWR". Make sure the type of
input selected is (D) which means it is digital.
5) It is now possible to select the colour of the led in function of the status of the input:
Colore quando
Colore quando
l'ingresso è al
l'ingresso è al
valore
valore
End Scale
Start Scale
User Manual
Rev. 1.0 - 17/01/03
29 / 50