Table of Contents
Advertisement
SCM-TLC
If you require a maximum value inside the scale (in order to have an alarm led on
the command, when the value is superior), write it in the "Max/Col" box.
Ex: If you enter 760 as an "End scale" value and 600 as a "Max/Col" value, you
will have a command as shown in the figure. Please note that when the value
setted in "Max/Col" is exceeded, the green led situated on the upper and right
side becomes red.
8) Press the " OK" button.
The new command was positioned. It is now possible to have it moved,
redimensioned or cancelled.
Please note that when the mouse cursor passes on the control, the icon
changes. In order to move, cancel or vary the dimensions or change the parameters
of the command, press the right button of your mouse. The menu from which it is
possible to make choices will be displayed.
"Change Font" "Change Back color" and "Change Fore Color", are used for the
labels (label).
To insert a label (label) in order to recognize the measurement.
1) Choose "Add Label" from the "Add control" menu.
2) Select the same measurement chosen formerly: PJ500 FWD Power.
3) 3. Press the "Ok button".
The result will be as follows:
28 / 50
Rev. 1.0 - 17/01/03
User Manual
Advertisement
Table of Contents
