Table of Contents
Advertisement
4. Commands from remote (TLC)
Through these commands sends under form of SMS they could be modified the
states of any exits and activate any functions of the TLC.
•INFO: Sending this message as SMS from any mobile phone, you must have in
answered an other SMS with the number and name of the station, the forward
and reflected power present in percentage and the currents alarms.
•ALARM: Sending this message as SMS from any mobile phone, you must have in
answered an other SMS with the number and name of the station, the forward
and reflected power present in percentage, name and number of the last 6 alarms
currently in memory.
•
TXON: Sending this message as SMS from any mobile phone, it moves the relay
1 of the base telemetry card n.1 in TOGLE_OFF modality and you must have in
answered an other SMS message with the number, name of the station and the
wording " Comand SMS Ok".
•
TXOFF: Sending this message as SMS from any mobile phone, it moves the
relay 2 of the base telemetry card n.1 in TOGLE_OFF modality and you must
have in answered an other SMS message with the number, name of the station
and the wording " Comand SMS Ok".
•
OUTON (out): Sending this message as SMS from any mobile phone, it moves
the relay "num", in the programmed formality, of the last telemetry card and you
must have in answered an other SMS message with number, name of the station
and the wording "Comand SMS Ok".
•
OUTOFF (out): Sending this message as SMS from any mobile phone, it moves
the relay "num", in the programmed formality, of the last telemetry card and you
must have in answered an other SMS message with number, name of the station
and the wording "Comand SMS Ok".
•
RESET: Sending this message as SMS from any mobile phone, it reset the present
alarms in memory and and you must have in answered an other SMS message
with number, name of the station and the wording " Comand SMS Ok".
User Manual
Rev. 1.0 - 17/01/03
SCM-TLC
47 / 50
Advertisement
Table of Contents
