Additional Standard Telemetry Card - R.V.R. Elettronica SpA TLC2000 User Manual

TLC2000

7.3 Additional Standard Telemetry Card

This is a normal telemetry card, but the system management software uses it to
control other parameters. The card internal address must always be the last one of
the chain.
7.3.1 Balanced Analog Input
The balanced analog inputs of this special card are all available by connecting the
signals as indicated in the specific chapter.
7.3.2 Digital/analog Input
The unbalanced digital/analog inputs of this special card are all available by connecting
the signals as indicated in the specific chapter.
The jumper on JP4 must always be inserted at the corresponding position.
7.3.3 Rly output
All of the contacts of the relay switches of this connector are available and work in 3
ways:
Generic: it switches to On and Off status statically.
•
• TogleOff: always Off and switches to On for a short length of time.
• TogleOn; always On and switches to Off for a short length of time.
24 / 50
Numero pin
2 Nome e tipo impostabile tramite PC
15 Nome e tipo impostabile tramite PC
3 Nome e tipo impostabile tramite PC
16 Nome e tipo impostabile tramite PC
4 Nome e tipo impostabile tramite PC
17 Nome e tipo impostabile tramite PC
5 Nome e tipo impostabile tramite PC
18 Nome e tipo impostabile tramite PC
21 Nome e tipo impostabile tramite PC
9 Nome e tipo impostabile tramite PC
22 Disponibile
10 Disponibile
23 Disponibile
11 Disponibile
24 Disponibile
12 Disponibile
1, 6, 7, 8, 13, Massa
14, 19, 20, 25
Rev. 1.0 - 05/05/03
Significato Jumper su JP4
pos. 1
pos. 2
pos. 3
pos. 4
pos. 5
pos. 6
pos. 7
pos. 8
pos. 9
pos. 10
pos. 11
pos. 12
pos. 13
pos. 14
pos. 15
pos. 16
User Manual