Table of Contents
Advertisement
SCM-TLC
In order to change some levels such as attenuation of the inputs and the output power
percentage of the PTXLCD, double click on the measurement that you wish to change
and insert the new value required.
If you wish to create or modify the personalization, please refer to Chapter "Creation
and editing of the personalization window".
1.4.2 Standard interface
Behind the Personalization window, there is the standard Telecon interface.
It is composed of 5 main areas:
User Manual
Rev. 1.0 - 17/01/03
5 / 50
Advertisement
Table of Contents
