Table of Contents
Advertisement
In this way, each station memorized in the Telecon software contains the programed
parameters.
The type of data identify the groups of options that can be programed:
1) General: these are the parameters common to all the types of RVR stations.
ID of the station
•
Name of the station
•
Number of the SMS Assistance Center
•
Number of SMS attempts
•
2) Telephone:
•
Phone numbers recognized by the station
•
Enables to send SMS messages to the system
•
Enables the reception of SMS messages.
3) Inputs: monitoring of the auxiliary inputs that generate alarms (in the predisposed
systems).
•
Name of the alarm (that is transmitted in the message)
Intervention threshold of the alarm in percentage (0% = 0VDC, 100% = 5VDC)
•
Alarm activation front (indicates whether the alarm is activated or not in case of
•
supply failure).
4) Outputs: monitoring of the outputs (in the predisposed systems)
•
Type of output commutation (status, impulsive ON or impulsive OFF).
5) Alarms Enable: (in the preset systems)
•
Enables the standard alarms of the station.
When you click on the parameter that you intend to modify, the data entering window
is displayed.
The window is slightly different in function of the type of measurement that is to be
modified.
Window for the entering of names and numbers. It is possible to write whatever.
Window for the entering of data. It is necessary to choose between the proposed
options.
User Manual
Press this button in order to read the parameters from the database of
the station.
Press this button in order to write the parameters in the database of the
station.
Rev. 1.0 - 17/01/03
SCM-TLC
13 / 50
Advertisement
Table of Contents
