Red Lad Filter - Christie CP42LH Service Manual

2. Remove the Light Engine Laminar Airflow Device (LAD) filter from the ferrule fan 22 (A).
3. Remove the LAD filter from the diffuser integrator fan 23 (B).

Red LAD Filter

1. Remove the Light engine air
2. Remove the Light engine fans (fans 1, 2, 3, and
3. Remove the filter from the filter housing.
Laser module filter
This filter is on the front of the laser module.
1. At the front of the laser module, tilt the top of the air filter toward you and lift out.
2. Pull the filter out and wash it.
See Clean a washable filter
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
A
B
filter, see page 48.
4), see page 53.
on page 47.
Parts and Module Replacement
51