Reassemble The Projector And Connect The Fibers To The Light Modules - Christie CP42LH Service Manual

Reassemble the projector and connect the fibers to the light
modules
1. Reinstall the fiber optic cable, breakout ferrule, and fiber optic strain relief cover.
2. Close and lock the optical access door.
3. Remove the Kapton tape from the light module lens barrel.
4. Guide the fiber on an angle into the lens barrel with your index finger.
5. Slowly insert the fiber into the lens barrel and tighten the SMA connector.
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
Maintenance
81