Lvps/Liquid Cooling Cover - Christie CP42LH Service Manual

LVPS/liquid cooling cover

Estimated replacement time: 1 minute
Remove the LVPS/liquid cooling cover to gain access to
the liquid cooling assembly filter.
1. Loosen the 3 captive screws on the top of the
cover.
2. Lift up the cover up and away from the
projector.
Rear cover
Estimated replacement time: 12 minutes
1. Remove the Fiber
2. Remove the Beam
3. Remove Front top
4. Remove Rear top
5. Disconnect the P1, P8, J2, J4, and J5 connectors from the
interlock card.
6. Loosen the 3 screws securing the rear cover.
7. Disconnect the touch panel controller (TPC) cable.
8. Tilt and lift the back cover away from the projector.
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
bundle, see page 45.
stop, see page 46.
lid, see page 41.
lid, see page 42.
Parts and Module Replacement
44