Save The Laser Settings - Christie CP42LH Service Manual

5. Move the System Red and System blue CTL sliders up or down to bring the measured values
closer to the target white point values:
DCI: x = 0.314, y = 0.351
D65: x = 0.3127, y = 0.3290
For more precise adjustments, click the cap on the slider and press the up and down arrow
keys.
6. Repeat steps 4 to 5 until the measured values are approximately the same as the target white
point.

Save the laser settings

1. Open the laser manager application.
2. Click the System tab.
3. Click Save in the Configuration Management area.
4. Type a name for the settings file and press Enter.
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
Adjust the Image
38