Troubleshooting - Christie CP42LH Service Manual

Troubleshooting

The section provides information about troubleshooting the Christie Laser Projection System.
Check the laser module status
1. Open the Christie Laser Bank Manager application.
2. Review the quick status panels (A).
During normal operation, the quick status panels have a green background. A yellow
background indicates a warning, and a red background indicates an alarm condition.
Do not operate a laser module if the humidity sensor is not working. Operating with a failed
humidity sensor can reduce the longevity of the laser and void the warranty. Failure to comply
may result in equipment damage.
3. Check the alarm codes (B).
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
A
Code Description
V Bus voltages
A Ambient temperature
F Fans
C Chiller
S File System (SD card)
E Red enclosure
B
86