Cleaning or installing the filter
For dusty environments, Christie recommends purchasing the optional accessory dust filter
(P/N: 140-148104-XX).
Regularly clean or replace the filters in the projector to ensure dust and other foreign materials are
kept out of the projector.
1. Turn off the projector.
2. Remove the filter cover.
3. Remove the filter from its compartment.
4. Clean or replace the filter.
In environments where dust, dirt, and other contaminants are higher than normal, Christie
recommends replacing the air filter more frequently than 500 hours as specified in the current
maintenance schedule.
Inspire Series Installation and Setup Guide
020-001933-02 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
23