Fold Mirror - Christie CP42LH Service Manual

5. Loosen the other screws from each of the tabs.
6. Move the tabs out of the way.
7. Wearing clean, lint-free gloves provided in the service kit, carefully slide out the cold mirror.
8. Recreate your Measured Color Gamut Data (MCGD) files. See the user manual for instructions.
When replacing the cold mirror, make sure the cold mirror is inserted into the holder with its
reflective surface (A) facing inward. Image (B) shows the non-reflective surface.

Fold mirror

The fold mirror is located underneath the front section of the projector.
Estimated replacement time: 15 minutes + 30 minutes for calibration
1. Remove the Fold mirror access
2. Remove one of the screws from each of the 3 tabs.
3. While holding the mirror in position, move each of the tabs out of the way.
4. Wearing the gloves provided with the service kit, hold the mirror in place and swing the tabs to
the side.
5. Lower the mirror and remove.
6. Recreate your Measured Color Gamut Data (MCGD) files. See the user manual for instructions.
CP42LH Service Manual
020-101686-03 Rev. 1 (08-2016)
A
panel, see page 60.
When reinstalling the fold mirror,
Parts and Module Replacement
Align the fold mirror, see page 26..
B
61